Which is the Best Glue for Rubber to Rubber? - 3D Insider (2023)

3D Insider is ad supported and earns money from clicks, commissions from sales, and other ways.

We all probably have some variety of all-purpose “super glue” stashed away somewhere in our house. These are great for repairing plastic toys in a pinch or if something falls apart in the kitchen. However, certain materials are a bit more challenging to repair with the usual super glue.

Rubber is a good example of such material. Rubber parts are usually meant to withstand a lot of abuse, so a rubber adhesive must be similarly flexible and impact-resistant. With this knowledge, let’s take a look at the best adhesives for gluing rubber to rubber.

What kind of rubber are you working with?

Further complicating the matter of choosing a suitable glue is the fact that there are a lot of different types of rubber, each with unique characteristics. After all, the term ‘rubber’ is used for any natural or synthetic material that exhibits superior flexibility, impact-resistance, and coefficient of friction.

Before you can choose the best adhesive, it would be prudent to try and identify the rubber you’re working with first. To help you out, here are some of the most common rubber types and how they are typically used:

  • Silicone rubber is a soft rubber, typically white or clear, that has a very high resistance to heat. It is commonly found in o-rings, gaskets, enclosures, and seals of cookware and ovenware.
  • Nitrile rubber is a fairly tough rubber designed to withstand extreme mechanical stress. Garden hoses and cable jackets are typically made with nitrile rubber.
  • Natural rubber is tough to identify since it can be modified to mimic the properties of many synthetic rubbers. It also has a very wide spectrum of applications from gaskets to hoses and automotive parts.
  • Butyl rubber is known for its durability and chemical resistance. It is found in specialty chemical gloves, as well as in gas masks, industrial safety equipment, and certain tires.

No matter which type of rubber you have, it’s important to remove any traces of grease on its surface by wiping it down with a solvent. Priming the mating surfaces by sanding or buffing them would also be a good idea.

(Video) Why Ticks Are So Hard To Kill

The top 5 best glues for rubber-to-rubber applications

1. Loctite Clear Silicone Waterproof Sealant

Which is the Best Glue for Rubber to Rubber? - 3D Insider (1)

BEST FOR: Silicone rubber

In almost all cases, the best adhesive to bond any material is the adhesive that is made of the material itself. This is the same concept for using a silicone-based adhesive to bond two pieces of silicone rubber together. The use of silicone adhesives means that the repaired joint loses none of the flexibility, heat-resistance, and waterproofing expected of silicone.

This silicone-based adhesive from Loctite is an example of a single-component glue which we are recommending because of its convenience. It’s easy to apply, requires no mixing, and requires no curing agent. It has temperature limitations, however, so we don’t recommend it for objects that will be used for cooking or for oven linings.

This adhesive does not have a lot of viscosity, so it’s not the most appropriate if you need a glue that can fill a gap. Should this be the case, a silicone-based moldable glue would be a better option.

In any case, keep in mind that silicone is a type of rubber with a low coefficient of friction. This stresses the idea of “priming” the mating surface to give it the glue a roughness to attach onto.

2. Gorilla Super Glue

Which is the Best Glue for Rubber to Rubber? - 3D Insider (2)

(Video) BRILLIANT IDEAS with BAKING SODA and SUPER GLUE

BEST FOR: All types of rubber except natural rubber

If you’re not quite sure what rubber you’re working with, then your best bet might be the good old Super Glue from Gorilla. In more technical terms, this is a cyanoacrylate adhesive that transforms from liquid to plastic after curing. Cyanoacrylate glue works with all but the most difficult types of rubber.

The bonding action of cyanoacrylate glue is purely mechanical in nature and can be improved by enhancing how well the glue “wets” the mating surface. Again, removal of any grease residue and sanding of the mating surface will go a long way in ensuring good adhesion.

The biggest downside of working with cyanoacrylate glue is if you prefer to have ample time to work with your mating pieces because Super Glue sets in less than a minute. It also has a maximum gap-filling capability of 0.5 mm on account of its low viscosity.

3. Devcon 5-Minute Epoxy

Which is the Best Glue for Rubber to Rubber? - 3D Insider (3)

BEST FOR: Nitrile and other hard rubbers

When bonding two pieces of a hard rubber like nitrile, the strength of the resulting bond must also match the strength and impact-resistance of the rubber material. For these situations, we recommend a high-strength two-component epoxy.

(Video) Facebook Live Replay/Forever Fern/Forever Flourishing Dies/Puff Paint/Cardmaking

Epoxy adhesives are well-known for their all-around versatility and superior strength. This particular glue also benefits from quick-setting characteristics., which is ideal if you need a valve seat or liner fixed instantly. Once the two components have been mixed, you only have around two minutes to line up the pieces. At the 5-minute mark, the epoxy should have completely hardened.

While this epoxy adhesive should also work well for other types of rubber, we would not recommend it for more flexible rubbers like silicone or butyl. The hardened epoxy layer is highly rigid and may fall apart if the joint needs to stretch or bend regularly.

4. Loctite Speedbonder Acrylic Adhesive

Which is the Best Glue for Rubber to Rubber? - 3D Insider (4)

BEST FOR: Natural rubber

Acrylic adhesive is considered by many to be the ultimate adhesive – the kind of glue you use when all others have failed. It is a little more expensive than other glues but has been traditionally used for difficult plastics like PTFE, PP, and PE.

Natural rubber is considered one of the more difficult rubbers to glue, but there’s probably a wide assortment of rubbers out there with additives like plasticizers that also make them hard to glue. To be clear, this adhesive works best with an activator (which is strangely sold separately) to help accelerate its curing. Without the activator, the curing of the adhesive will take up to 48 hours.

Acrylic adhesives are known to have superior shelf-stability, toughness, and durability against deterioration by external factors. The properties of the mated joint can also be enhanced via heat curing, but make sure to read the instructions carefully on how to do this. The joint created by an acrylic adhesive is best described as being industrial-grade in quality.

(Video) THE ULTIMATE FOAMY SETUP! with MKS Servos inside!!!

5. Shoe Goo Shoe Repair Glue

Which is the Best Glue for Rubber to Rubber? - 3D Insider (5)

Best for: Shoes

Every single person probably ends up breaking at least one shoe each year. However, not everyone can afford to buy one when this happens. If t this is a situation that you’re familiar with, then a tube of this Shoe Goo adhesive might be a worthwhile investment.

Shoe Goo isn’t as forthcoming about the components of this adhesive. It might be a trade secret, but Shoe Goo has built a solid reputation as the go-to adhesive for shoe repairs. Since most shoes have some rubber components, it’s safe to assume that Shoe Goo will work with other common rubber surfaces.

The benefit of Shoe Goo is that it creates adhesive layers and joints that can withstand the usual conditions that shoes go through. These include constant movement, exposure to moisture, abrasion, and moderate levels of heat. It also creates a clear coat, as it was developed to not detract from the aesthetics of shoes.

Shoe Goo emits irritating fumes while curing, so make sure to use it in a space with good ventilation. It can also take about 8 hours to fully cure.

Final thoughts

What makes the selection of glues for rubber is the fact that ‘rubber’ can refer to a wide array of different materials. This means that really is no single best glue for rubber to rubber applications. Instead, the specific type of rubber and the intended application of the glued pieces should be put into consideration.

(Video) AQUARIUM SAFE Silicone, Glue, Cement and Adhesives.

FAQs

What glue will stick rubber to rubber? ›

Cyanoacrylate adhesive, commonly known as super glue, is generally the best adhesive for rubber bonding. You only need a very small amount and the bond becomes very strong and rigid almost instantly.

What is the best super glue for rubber? ›

In general, cyanoacrylate instant adhesive is the best choice for bonding rubbers. More commonly known as super glue, this product cures in just seconds and lets you know quickly whether or not the bond will hold.

Does rubber cement work on rubber? ›

Rubber Cement

When it dries, the bond is flexible, virtually unbreakable and waterproof. Use rubber cement to bond rubber, leather, glass, ceramic and many other materials.

Which epoxy is best for rubber? ›

Gorilla Epoxy

Use this two-part epoxy to adhere difficult-to-bond rubber and plastic substrates. These include polypropylene, polyethylene, polytetrafluoroethylene (PTFE), ethylene propylene diene monomer (EPDM) rubbers, and plastics.

Is Gorilla Glue good for rubber? ›

We call it Impact-Tough® because the reliable bond stands up to wear and tear. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic*, metal, stone, ceramic, paper, rubber and more.

Can Fevikwik stick rubber? ›

FEVIKWIK is suitable for bonding plastics, metal and rubber components. It can be also used to lock components which are already assembled. It has typical applications in molded furniture, sign boards, gift articles. It is also used for wide range of industrial applications.

Does epoxy glue work on rubber? ›

Epoxy glues are great for quick curing rubber adhesion. If you need to bond rubber or some of the more tricky plastics like PTFE or polypropylene, then these two-part epoxy glues are ideal.

Does silicone stick to rubber? ›

Thanks to elastomeric technology, silicone-based adhesives can be engineered to bond silicone rubber in a variety of applications ranging from household to transportation, to outer space.

How do you make rubber adhesive? ›

Natural rubber-based pressure-sensitive adhesives are generally prepared by dissolving a natural rubber in an organic solvent such as toluene, hexane or heptane, and then dissolving therein a compounding additive such as a tackifier resin or a softening agent.

How do you permanently bond rubber to rubber? ›

Cyanoacrylate instant adhesive is generally your best bet for rubber bonding; epoxies are not usually recommended – rubber is easily peeled off. Cyanoacrylate adhesive cures in seconds so you can find out pretty quickly whether it is going to work or not!

Can you super glue rubber together? ›

The most commonly used glue for rubber bonding is cyanoacrylate adhesive (i.e., super glue). It is often considered the best glue for rubber since it quickly forms a strong bond between substrates.

Is rubber cement a permanent glue? ›

Perfect for scrapbooks and cut-and-paste projects, Elmer's No-Wrinkle Rubber Cement permanently bonds items together--incuding photos to paper--without causing wrinkles.

Does Gorilla epoxy work on rubber? ›

Gorilla Glue will work on the most common types of rubber but it will have a hard time on more specialized types of rubber such as EPDM-Rubber and Silicone. So try to identify the type of rubber, that you want to glue and if it is a commonly used type then the chance is really good, that Gorilla Glue will work on it.

How do you fix rubber? ›

You can repair split, cracked, or torn rubber by covering the damage with cyanoacrylate-based adhesive. The liquid or gel will seep into cracks and tears and then dry to form a rubberlike seal. Use sandpaper to lightly buff the repair area. Apply the repair adhesive to the tear and half an inch beyond the damaged area.

Can I melt rubber together? ›

Rubber can be thermoplastic or thermoset. If it's thermoset, it will not melt, it will just burn and catch fire. If it's thermoplastic, it will melt and you can press the two pieces together.

How long does Gorilla Glue take to dry on rubber? ›

Or, if you don't have a clamp, use heavy objects or Gorilla Tape® to achieve the appropriate clamping pressure. For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure.

Which Gorilla Glue is the strongest? ›

Best Overall: Gorilla Super Glue Gel

This extra-strong, long-lasting cyanoacrylate glue is also made to resist impact and shock. It effortlessly bonds to many different materials, including wood, metal, ceramic, stone, leather, fabric, rubber, paper, and most plastics.

What does Gorilla Glue not stick to? ›

What is this? The glue is meant to expand into the materials to create a strong bond. However, since it cannot expand into plastic, any bond it makes is weak. This expansion explains why Gorilla Glue sticks to metal, stone, ceramics, and rubber, but not plastic.

Does hot glue work on rubber? ›

Yes, hot glue can work on some rubber types, however, it might not work so great on certain rubbers that have an elevated oil content or those that contain plasticizers. Also, using hot glue on plastics like polypropylene and polyethylene will not work and the bond formed will not be strong enough.

Is E6000 good for rubber? ›

E6000 has exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete. It also adheres strongly to leather, rubber, vinyl and many plastics. It will not break down or become brittle with temperature extremes. E6000 Bonds Everything So You Can Create Anything™.

Will JB Weld work on rubber? ›

Broadly speaking, most J-B Weld products will not adhere or bond well to: Any flexible rubber surface.

How do you bond silicone rubber together? ›

Silicone-based adhesives tend to work well on silicone but if you are looking for a fast cure and to get away from isocyanate chemicals then options are limited. A polyolefin primer such as Permabond POP can be used to prime the surface of the silicone and then parts can be bonded with a cyanoacrylate.

Videos

1. What is E6000 industrial adhesive glue used for? - pros, cons, uses, instructions, drying times
(MakerHigh)
2. How to fix a crack in the wall - DIY
(Billshowto)
3. HOW BRACES WORK
(Now I've Seen Everything)
4. How to Make Pre-ink Rubber Stamps in just 5 minutes | Self Ink Flash Rubber Stamp Tutorial DIY
(Globe Studio One)
5. I Want to Get Inside You! - Steam Deck Tear Down
(Linus Tech Tips)
6. Making an inside corner (folded) | Firestone RubberGard EPDM
(Elevate EMEA)
Top Articles
Latest Posts
Article information

Author: Arielle Torp

Last Updated: 02/01/2023

Views: 5310

Rating: 4 / 5 (41 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Arielle Torp

Birthday: 1997-09-20

Address: 87313 Erdman Vista, North Dustinborough, WA 37563

Phone: +97216742823598

Job: Central Technology Officer

Hobby: Taekwondo, Macrame, Foreign language learning, Kite flying, Cooking, Skiing, Computer programming

Introduction: My name is Arielle Torp, I am a comfortable, kind, zealous, lovely, jolly, colorful, adventurous person who loves writing and wants to share my knowledge and understanding with you.